Leather Laserable Sheets

DESCRIPTION GENERAL INFORMATION
Stock our Faux Leather Sheets and customize on your own! With choices between low melt & pressure sensitive backing. Personalization at your fingertips!

SHEET SIZES
24"x12"

GENUINE LEATHER COLORS
• Natural
• Caramel
• Taupe

FAUX LEATHER COLORS
• Black/Silver
• Chestnut/Black
• Chocolate/Black
• Sandstone/Black

BACKINGS
Low Melt - This backing us commonly used on wearables and applied with a heat press.
Pressure Sensitive - This sticker backing is commonly used on hard goods & self applied with hand pressure. 

LIMITATIONS
Low Melt: Since the product is applied with heat, it is not recommended for use on materials that may be heat sensitive (ex. some nylons, silk, some plastics, leather wool, fleece, etc.)
Pressure Sensitive: The use on surfaces that may contain an oil finish, such as silicon, Teflon, rough fabrics, or outdoor goods is not recommended. 

WASHING INFORMATION
Faux Leather will withstand at least 52 domestic washing machine cycles at 104° F max.

SHELF LIFE
One year shelf life before applying (room temperature controlled environment).

Note: World Emblem encourages our clients to test applications of our products unto their garments. World Emblem is not responsible for damages resulting from washing and laundering of any product purchased.

Revised 05.18.22

Our Genuine and Faux Leather Sheets are meant to be used for etching/engraving process to obtain Faux Leather Patches. If material is manipulated in anyway, application settings may be affected.

PRESSURE-SENSITIVE
Make sure the application area is thoroughly cleaned. We recommend the use of rubbing alcohol. Remove paper backing and press firmly on the desired location.

LOW MELT HEAT SEAL ON GARMENTS - TOP HEAT

1. Set the press at 315-325° F with 70-80 psi of pressure.
2. Place the garment in the press. Make sure that the application location is wrinkle-free.
3. Place the patch onto the desired location on the garment. Thermal tape is optional.
4. Place a FlexStyle® silicone pad over the design.
5. Press for 12-18 seconds
6. Remove the garment from the press and allow to cool.

LOW MELT HEAT SEAL ON HATS - USING THE IQ 360 HAT HEAT PRESS

1. Set the press at 245°-255° F for top heat and 315°- 320°F for bottom heat with 60-80 psi of pressure.
2. Place the hat on the heat press, leaving out the inner layer of the cap. Use the adjustment lever for a better grip.
3.  Place the patch on the desired location. To secure the patch and preventing it from moving, use Thermal Tape.
4. Place a FlexStyle® silicone pad over the design.
5. Press for 10-15 seconds.
6. Deactivate the adjustment lever and remove the hat from the heat press.
7. Remove the Thermal Tape once the patch has cooled.

DISCLAIMER: World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.

NOTE: Please check out youtube.com/worldemblem for step by step instructions for applying our apparel decorations.

Note: World Emblem encourages our clients to test applications of our products unto their garments. World Emblem is not responsible for damages resulting from washing and laundering of any product purchased.

Revised 05.18.22

Pressure Sensitive Backing: $22.49 per sheet

Low Melt Backing: $17.52 per sheet

DESCRIPTION GENERAL INFORMATION
Stock our Genuine Leather Sheets and customize on your own! With choices between Natural, Caramel and Taupe, with both low melt & pressure sensitive backing. Personalization at your fingertips!

SHEET SIZES
22" x 31.5"

LEATHER COLORS
• Natural
• Caramel
• Taupe 

BACKINGS
Low Melt - This backing us commonly used on wearables and applied with a heat press.
Pressure Sensitive - This sticker backing is commonly used on hard goods & self applied with hand pressure. 

LIMITATIONS
Low Melt: Since the product is applied with heat, it is not recommended for use on materials that may be heat sensitive (ex. some nylons, silk, some plastics, leather wool, fleece, etc.)
Pressure Sensitive: The use on surfaces that may contain an oil finish, such as silicon, Teflon, rough fabrics, or outdoor goods is not recommended. 

WASHING INFORMATION
This product is intended to be used on hats, bags and jackets not regularly washed. Not recommended for dry cleaning or industrial wash.

SHELF LIFE
One year shelf life before applying (room temperature controlled environment).

Disclaimer: Our Genuine Leather sheets are a natural product, truly authentic.Variations in color are not to be considered a fault but inherent of
the natural beauty and uniqueness of the leather. Every piece is different, therefore irregularities in the consistency and depth of the color are expected. Also, due to the nature of leather (it’s colors and textures), digital
simulation might vary from the actual physical sheets. We at World Emblem strive for your satisfaction and will do our very best to maintain uniformity of all products.

Note: World Emblem encourages our clients to test applications of our products unto their garments. World Emblem is not responsible for damages resulting from washing and laundering of any product purchased.

Revised 05.18.22

PRESSURE-SENSITIVE
Make sure the application area is thoroughly cleaned. We recommend the use of rubbing alcohol. Remove paper backing and press firmly on the desired location.

LOW MELT HEAT SEAL ON GARMENTS - TOP HEAT

1. Set the press at 315-325° F with 70-80 psi of pressure.
2. Place the garment in the press. Make sure that the application location is wrinkle-free.
3. Place the patch onto the desired location on the garment. Thermal tape is optional.
4. Place a FlexStyle® silicone pad over the design.
5. Press for 12-18 seconds
6. Remove the garment from the press and allow to cool.

LOW MELT HEAT SEAL ON HATS - USING THE IQ 360 HAT HEAT PRESS

1. Set the press at 275°-285° F for top heat and 315°- 320°F for bottom heat with 60-80 psi of pressure.
2. Place the hat on the heat press, leaving out the inner layer of the cap. Use the adjustment lever for a better grip.
3. Place the patch on the desired location. To secure the patch and preventing it from moving, use Thermal Tape.
4. Place a FlexStyle® silicone pad over the design.
5. Press for 15-18 seconds.
6. Deactivate the adjustment lever and remove the hat from the heat press.
7. Remove the Thermal Tape once the patch has cooled.

LIMITATIONS
Low Melt: Since the product is applied with heat, it is not recommended for use on materials that may be heat sensitive (ex. some nylons, silk some plastics, leather, wool, fleece, etc.). The product is intended to be used on hats, bags and jackets that are not intended for regular home washing.
Pressure-Sensitive: The use of these emblems on surfaces that may contain an oil finish, such as silicon, Teflon™, rough fabrics, or outdoor goods is not recommended.

DISCLAIMER: World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.

NOTE: Please check out youtube.com/worldemblem for step by step instructions for applying our apparel decorations.

Pressure Sensitive Backing: $81.04 per sheet

Low Melt Backing: $66.45 per sheet