Emblem Size Limits

Minimum – 0.5”W X 0.5”H
Maximum – 6.0”W X 6.0”H

Due to the laser cutting process, patch size may vary by +/- 2mm.

Text and Elements

Minimum text size - 1mm height
Minimum elements - 0.5mm wide

Colors

Backing:

• Low melt Heat Seal
• Pressure Sensitive

Limitations

Low melt - Recommended application for thicker materials, such as jackets, and hats that can withstand a heat press and 320° F. Not recommended for use on materials that may be heat sensitive (ex: some nylons, silk, some plastics, leather, wool, fleece, etc.) or for weather-treated materials, due to chemicals used that do not allow the emblems to adhere properly.
Pressure-sensitive - Recommended application is on flat, non-textured surfaces, including glass, plastic, wood, and metal. Not recommended for application on surfaces that may contain an oil finish, such as silicon, Teflon™, rough fabrics, or outdoor goods.

Engraving Area:

Border Options:

• Borderless
• Overlock: 3mm (+/- 0.5mm)

Washing Information:

Faux Suede Patches will withstand up to 25 domestic washing machine cycles.

Shelf Life:

To maximize the shelf life of this product, please keep at room temperature.

Revised 10.04.24

Pressure-sensitive

1. Use rubbing alcohol to thoroughly clean the application area
2. Remove paper backing and press emblem firmly on desired location
3. After applying pressure, peel the clear top carrier from the emblem

Low Melt Backing with a Top Heat Press - Garments

1. Set press to 315-325°F for top heat with 70-80 psi of pressure.
2. Ensure application location is wrinkle-free and place garment onto press.
3. Place patch onto desired location on garment. Thermal Tape is optional.
4. Over a FlexStyle® Silicone Pad, turn around garment and load into the heat press.
5. Press for 12-18 seconds.
6. Remove garment from press and allow to cool.

Low Melt Heat Seal on Hats - Using the 360 IQ™ Hat Heat Press

1. Set press to 275°-285°F for top heat and 315°- 320°F for bottom heat with 60-80 psi of pressure.
2. Place hat on heat press, leaving out the inner layer of the cap. Use adjustment lever for a better grip.
3. Place emblem onto desired location. To secure the emblem and prevent it from moving, use Thermal Tape.
4. Press for 15-18 seconds.
5. Deactivate the adjustment lever and remove the hat from the heat press.
6. Remove Thermal Tape once the patch has cooled.

Disclaimer

World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.

Note: Please check out www.youtube.com/worldemblem for step-by-step instructions for applying our apparel decorations.

Pricing

Using the drop-downs above, you can find the approximate price per item, based on the emblem size and quantity ordered.

To determine the size of your emblem, use the following formula:
Size = Width + Height / 2

Price Includes

Heat seal or pressure-sensitive backing.

Electronic Proof

A digital sample via email is available in 72 hours. Edits are allowed.

Set-up Charges

One-time sample and setup fees.

• Up to 2.00”: $40.00
• Edit: $30.00

Production Time

Samples will take three days plus shipping. Production time will take three days plus shipping on an order up to 250 pieces. Add one day per 250 pieces.

Discover the perfect colors for your projects. View our Digital Color Chart.

Ready to get started? Shop our Physical Color Chart now.

Proposition 65 requires businesses to provide warnings about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.  These chemicals can be in the products in homes or workplaces, or that are released into the environment.

The CPSIA strengthened children's product safety by establishing critical safety and traceability requirements.

Primarily, CPSIA regulations enforce:

• Rigorous restrictions on phthalates

• Rigorous lead restrictions

• Requires acceptable levels for several substances common in most consumer products, especially those designed for children, ages 0-12.